Båndsager og sirkelsager. Kvalitetssager fra Italienske IMET.

Stort utvalg. Fra små sager, opp til 1200 x 1000 mm snitt.

Sager på lager

Manual bandsaw or with gravity lowering mitre cutting from 0° to 60° left.

  • Vice with quick clamping. Easy stops at 0°, 45° and 60° left, graduated plate to identify different angles.
  • Adjustment of the blade tension from the front side of the sawframe, checked by an end-stroke. Band guides with bearings for blade alignment, pulleys with 260 mm diameter.
  • Start-button inside the handle.
  • Floor stand with door and room inside.
  • Cast iron sawframe inclined to 42°, in order not to strain excessively the blade.
  • High tension blade 1000 kg/cm², through front screw, which allows a greater cutting accuracy and a bigger execution speed.
  • Cutting capacity at 90° round till 185 mm., square till 180 mm. and rectangular till 200×150 mm. TO SEE ALL THE CUTTING’ CAPACITY, DOWNLOAD THE ATTACHED BROCHURE.

Area angular cut ° 90 +30
Cutting capacity at 90°: round / square / rectangular mm. 185 / 180 / 200×150
Blade dimensions mm. 2080 x 20 x 0.9
Blade Motor Power KW 0.8
Blade speed mt/min. 30/60
Dimensions ( B x L x H ) mm. 600x1200x1700
Height of Work-table mm. 900
Weight Kg 205
Type of functioning Manual
Suitable for cutting: Steel / cast iron / aluminium

IMET GBS 185 er på lager i Skien, og kan leveres omgående.

Manual bandsaw suitable for the maintenance and for small productions of section bars, tubes, and solids up to 60° left.

Easy stops at 0°, 45°, 60° and graduated plate to identify different angles.
Blade guides with hard metal pads.
Floor stand with opening in the back containing removable coolant-tank and electro-pump.
Cast iron sawframe inclined to 42°, in order not to strain excessively the blade. High tension blade 1500 kg/ cm², which allows a greater cutting accuracy and a bigger execution speed.
Cutting capacity at 90 °, round 220 mm , square till 210, rectangular till 250×110.
TO SEE ALL THE CUTTING’ CAPACITY, DOWNLOAD THE ATTACHED BROCHURE.

Area angular cut ° 90 +30
Cutting capacity at 90°: round / square / rectangular mm. 220 / 210 / 250×110
Blade dimensions mm. 2450 x 27 x 0.9
Blade Motor Power KW 1.2
Blade speed mt/min. 35/70
Dimensions ( B x L x H ) mm. 680x1400x1800
Height of Work-table mm. 900
Weight Kg 240
Type of functioning Manual
Suitable for cutting: Steel / cast iron / aluminium

IMET GBS 218 er på lager i Skien, og kan leveres omgående.